12 // 15 marca 2020
Spin Time, Roma, Italy
- 12 // 15 marca 2020 | Foyers, Meeting Area Lectures, Classroom 3, Classroom 2, Classroom 1, Spin Time, Roma, Italy
- 12 // 15 marca 2020 | Auditorium, Spin Time, Roma, Italy
- 12 // 15 marca 2020 | Sala L, Spin Time, Roma, Italy
- 12 // 15 marca 2020 | Sala L Mapping, Spin Time, Roma, Italy
Festival
Czas trwania (minuty)
30
Co jest potrzebne
- 1 Projector (1920x1080 hdmi on stage)
- 1 PA
- 1 Audio mixer (2ch JACK? RCA? MiniJACK?)
- 1 table 2x1m
- 2 x D.I. Box
- 2 x 2 ways wedge monitors or Side fills (separate Aux send L-R)
- 1 x Front stage truss (min. 3m H) to hang up Laser projector by a standard clamp (Aliscaf)* center stage. Alternative: a 3m tripod with platform(eg. Manfrotto) at the FOH. A 220v, 50Hz Power strip is needed in the same place.(*) My ILDA cable is 25 meters long, it starts from the table center stage.
- 1 Hazer machine
- 1 strobe flash light eg. Atomic 3000 on stage, controllable from the table** (**) no other light projectors must be active during the show
- 1 Power strip (5 x EU-standard slot) 220V/50Hz (on table)
- laser can cover large surfaces with enough distance.
- 30 minutes setup time and sound check on the house systems with the aid of the local technicians.
Co przynoszą artyści
Laser projector 1W, 25 meters ILDA cable, Laptop, midi controller, analog synth
